Ductile Iron Tee
Description
Technical Parameters
Nominal diameter | DN40-400/1.5-24 |
MATERIAL | GGG40 GGG50 OTHER DUCTILE IRON |
Design standard | ISO 2531 BS EN 545 EN 598 |
Temperature range | 、，-20℃+120℃。，。 |
Suitable medium | fresh water,waste water,sewage,air,food,oil etc. |
No | PART | MATERIAL |
1 | LONG BODY | DUCTILE IRON GJS500 |
4 | GASKET | EPDM |
5 | TIE RODS | 4.8/8.8/A2/A4 |
Standards:
Mounting with flanges: EN 1092-1 PN10 / PN16. |
Pressure Test: EN 12266-1. |
Body: 24 bar. The maximum working pressure for this particular job is 16 bar, while the working temperature ranges from -5°C to +100°C. It is important to abide by these specific working conditions to ensure the longevity and effectiveness of the task at hand. Whether you are working in intense heat or cold, utilizing the proper techniques and equipment is key to achieving success. Safety precautions should also be taken into consideration in order to prevent any accidents or injuries during the work process. By adhering to these parameters and taking the necessary precautions, optimal results can be achieved. |
Introduction of dismantling joint
The dismantling joint is an innovative product that is used to connect various equipment, such as pumps and valves, to pipelines. It comprises a main body, a sealing ring, a gland, a telescopic short pipe, and other crucial components. By connecting them through full bolts, it can adjust to the size of the installation site during maintenance and installation, providing a certain displacement. As a result, during operation, it can transfer the axial thrust back to the whole pipeline, which enhances the efficiency of the work while also protecting other devices such as pumps and valves.
Hot Tags: ductile iron tee, China ductile iron tee manufacturers, suppliers, factory
Previous
Iron Casting Valve PartsNext
Gray Iron FittingsSend Inquiry
